Model：SLCU500D-RTR
Industry application: cutting process applied to the tabs on both sides of the positive and negative plates of lithium batteries
High degree of automation, modular design, the machine can meet a variety of technological requirements, and high efficiency.
The pole piece material roll is fixed by mechanical expansion shaft, and the machine is equipped with a positioning mechanism for changing the material roll, which is convenient and quick to change the material.
The equipment adopts high-sensitivity dual photoelectric centering anti-offset sensor to prevent the deviation of the coil, the anti-offset stroke is ±60mm, and the anti-offset resolution is ±0.1mm.
It can accurately measure the length of each pole piece. Within 12000mm, the length measurement error ≤±3mm; within 6000mm, the length measurement accuracy ≤±2mm.
Adopting upper and lower independent power rollers, servo drive, high synchronization and high precision.
High profile cutting quality, good production flexibility, long laser life and low maintenance cost.
Strong has accumulated R&D and design technology for laser micro-fabrication system for 12 years to ensure that the performance of the machine is stable.
| Optical unit | ||
|---|---|---|
| Number | Project | Parameter |
| 01 | Laser type | 1064nm picosecond |
| 02 | Laser power | 300W |
| 03 | Beam quality | M²＜1.3 |
| 04 | Minimum spot diameter | Φ1-2μm |
| 05 | Speed | ≤80m/min |
| 06 | Maximum material thickness | Pole piece thickness: ≤300um |
| 07 | Maximum processing width | 200-480mm |
| 08 | Maximum feeding width | 200-480mm |
| 09 | Maximum pulling length | 100-500mm |
| 10 | Inner diameter of feeding reel | 6" ɸ152mm |
| 11 | Pole piece size accuracy | ±0.3mm |
0769-83131319Tel：0769-83131319
Add: No.21，Dalang Xinbao 2nd Street，Dalang Town，Dongguan City，Guangdong Province
Tel：15312164555
Add: Building 8, No. 200 Shengpuxing Road, Suzhou Industrial Park
0769-85641965
Advisory
Tel